PIAGGIO LIBERTY 150 DENSO IU27 IRIDIUM (CRE,B, EVX,EIX,EVX)
Quick overview
IU27 IRIDIUM (CRE,B, EVX,EIX,EVX)
For riders that care about performance.By using a 0.4mm diameter iridium alloy center electrode and a special ground electrode, IRIDIUM POWER realizes spark performance unseen until now.It steadily gives a high level of response under a variety of driving conditions. The result? Increased acceleration and torque compared to regular plugs.
Speci?cations Include:
*A terminal nut is attached that fits with most of the worldâs spark plug cables. Please remove the nut for installations that do not require one. (The terminal nuts on the IWM and IK-G types are solid parts and cannot be removed.)Built-in, Highly Reliable Resistor
*All IRIDIUM POWER plugs include a highly reliable, 5,000 ohm monolithic resistor specification to reduce electromagnetic noise that may affect electronic devices. (For all plug types)
*Highly Corrosion Resistant, Burnished Nickel PlatingThe plug housing is plated with burnished nickel, the same as plugs used for racing. It is highly resistant to corrosion and rust even while touring in continually rainy weather and during motocross events. (Low-heat range types excluded)
*360° Laser WeldingThe process used to mount the iridium tip is a highly reliable âAll-around Laser Weldingâ process that is able to withstand all kinds of driving conditions. (For all plug types)
*Projected Center ElectrodeIn order to improve ignitability, the center electrode protrudes more than with conventional type plugs. This improves both acceleration response time and performance.(Only with: IU31, IUH24, IUH27, IX22, IX24, IX27, IUF22, IUF24, IWF22, IWF24, IWF27, IW24, IW27, IW29, IW31, and IW34)
*0.4 mm Diameter Ultra-?ne Iridium Center ElectrodeUsing a new iridium alloy with a very high melting point, the tip of the electrode can be made very fine. This enables the reduction of voltage necessary to cause the spark, and greatly improves ignitability. Moreover, the special iridium alloy used was developed by DENSO
*Taper-cut Ground ElectrodeThe tip of the ground electrode is cut to a fine taper to reduce the adverse effects of quenching, which greatly improves fuel ignitability. Also, because of the streamlined, taper-cut shape, the fuel-air mixture spreads more evenly in the gap, resulting in steady, reliable igniting of combustion.(excluding IUF27A, IUF31A, IU24A, IU27A, IU31A, IY24, IY27 & IY31)
*U-Groove Ground ElectrodeThe U-shaped groove on the ground electrode insures that the inside surface area is large enough to generate the flame kernel. This shape enables lower voltage needed to cause the spark and results in excellent ignitability without increasing the size of the spark gap. (excluding IUF27A, IUF31A, IU24A and IU31A)
*Insulator ProjectionThe projection of the insulator is optimally designed based on each plug's thermal value. This corresponds to requirements unique to thermal value, such as self-cleaning ability at lower thermal values, and heat resistance at higher thermal values. (For all plug types)
IRIDIUM POWER SPARK PLUGS
For riders that care about performance.By using a 0.4mm diameter iridium alloy center electrode and a special ground electrode, IRIDIUM POWER realizes spark performance unseen until now.It steadily gives a high level of response under a variety of driving conditions. The result? Increased acceleration and torque compared to regular plugs.
Speci?cations Include:
*A terminal nut is attached that fits with most of the worldâs spark plug cables. Please remove the nut for installations that do not require one. (The terminal nuts on the IWM and IK-G types are solid parts and cannot be removed.)Built-in, Highly Reliable Resistor
*All IRIDIUM POWER plugs include a highly reliable, 5,000 ohm monolithic resistor specification to reduce electromagnetic noise that may affect electronic devices. (For all plug types)
*Highly Corrosion Resistant, Burnished Nickel PlatingThe plug housing is plated with burnished nickel, the same as plugs used for racing. It is highly resistant to corrosion and rust even while touring in continually rainy weather and during motocross events. (Low-heat range types excluded)
*360° Laser WeldingThe process used to mount the iridium tip is a highly reliable âAll-around Laser Weldingâ process that is able to withstand all kinds of driving conditions. (For all plug types)
*Projected Center ElectrodeIn order to improve ignitability, the center electrode protrudes more than with conventional type plugs. This improves both acceleration response time and performance.(Only with: IU31, IUH24, IUH27, IX22, IX24, IX27, IUF22, IUF24, IWF22, IWF24, IWF27, IW24, IW27, IW29, IW31, and IW34)
*0.4 mm Diameter Ultra-?ne Iridium Center ElectrodeUsing a new iridium alloy with a very high melting point, the tip of the electrode can be made very fine. This enables the reduction of voltage necessary to cause the spark, and greatly improves ignitability. Moreover, the special iridium alloy used was developed by DENSO
*Taper-cut Ground ElectrodeThe tip of the ground electrode is cut to a fine taper to reduce the adverse effects of quenching, which greatly improves fuel ignitability. Also, because of the streamlined, taper-cut shape, the fuel-air mixture spreads more evenly in the gap, resulting in steady, reliable igniting of combustion.(excluding IUF27A, IUF31A, IU24A, IU27A, IU31A, IY24, IY27 & IY31)
*U-Groove Ground ElectrodeThe U-shaped groove on the ground electrode insures that the inside surface area is large enough to generate the flame kernel. This shape enables lower voltage needed to cause the spark and results in excellent ignitability without increasing the size of the spark gap. (excluding IUF27A, IUF31A, IU24A and IU31A)
*Insulator ProjectionThe projection of the insulator is optimally designed based on each plug's thermal value. This corresponds to requirements unique to thermal value, such as self-cleaning ability at lower thermal values, and heat resistance at higher thermal values. (For all plug types)
Description
IU27 IRIDIUM (CRE,B, EVX,EIX,EVX)
For riders that care about performance.By using a 0.4mm diameter iridium alloy center electrode and a special ground electrode, IRIDIUM POWER realizes spark performance unseen until now.It steadily gives a high level of response under a variety of driving conditions. The result? Increased acceleration and torque compared to regular plugs.
Speci?cations Include:
*A terminal nut is attached that fits with most of the world’s spark plug cables. Please remove the nut for installations that do not require one. (The terminal nuts on the IWM and IK-G types are solid parts and cannot be removed.)Built-in, Highly Reliable Resistor
*All IRIDIUM POWER plugs include a highly reliable, 5,000 ohm monolithic resistor specification to reduce electromagnetic noise that may affect electronic devices. (For all plug types)
*Highly Corrosion Resistant, Burnished Nickel PlatingThe plug housing is plated with burnished nickel, the same as plugs used for racing. It is highly resistant to corrosion and rust even while touring in continually rainy weather and during motocross events. (Low-heat range types excluded)
*360° Laser WeldingThe process used to mount the iridium tip is a highly reliable “All-around Laser Welding” process that is able to withstand all kinds of driving conditions. (For all plug types)
*Projected Center ElectrodeIn order to improve ignitability, the center electrode protrudes more than with conventional type plugs. This improves both acceleration response time and performance.(Only with: IU31, IUH24, IUH27, IX22, IX24, IX27, IUF22, IUF24, IWF22, IWF24, IWF27, IW24, IW27, IW29, IW31, and IW34)
*0.4 mm Diameter Ultra-?ne Iridium Center ElectrodeUsing a new iridium alloy with a very high melting point, the tip of the electrode can be made very fine. This enables the reduction of voltage necessary to cause the spark, and greatly improves ignitability. Moreover, the special iridium alloy used was developed by DENSO
*Taper-cut Ground ElectrodeThe tip of the ground electrode is cut to a fine taper to reduce the adverse effects of quenching, which greatly improves fuel ignitability. Also, because of the streamlined, taper-cut shape, the fuel-air mixture spreads more evenly in the gap, resulting in steady, reliable igniting of combustion.(excluding IUF27A, IUF31A, IU24A, IU27A, IU31A, IY24, IY27 & IY31)
*U-Groove Ground ElectrodeThe U-shaped groove on the ground electrode insures that the inside surface area is large enough to generate the flame kernel. This shape enables lower voltage needed to cause the spark and results in excellent ignitability without increasing the size of the spark gap. (excluding IUF27A, IUF31A, IU24A and IU31A)
*Insulator ProjectionThe projection of the insulator is optimally designed based on each plug's thermal value. This corresponds to requirements unique to thermal value, such as self-cleaning ability at lower thermal values, and heat resistance at higher thermal values. (For all plug types)
IRIDIUM POWER SPARK PLUGS
For riders that care about performance.By using a 0.4mm diameter iridium alloy center electrode and a special ground electrode, IRIDIUM POWER realizes spark performance unseen until now.It steadily gives a high level of response under a variety of driving conditions. The result? Increased acceleration and torque compared to regular plugs.
Speci?cations Include:
*A terminal nut is attached that fits with most of the world’s spark plug cables. Please remove the nut for installations that do not require one. (The terminal nuts on the IWM and IK-G types are solid parts and cannot be removed.)Built-in, Highly Reliable Resistor
*All IRIDIUM POWER plugs include a highly reliable, 5,000 ohm monolithic resistor specification to reduce electromagnetic noise that may affect electronic devices. (For all plug types)
*Highly Corrosion Resistant, Burnished Nickel PlatingThe plug housing is plated with burnished nickel, the same as plugs used for racing. It is highly resistant to corrosion and rust even while touring in continually rainy weather and during motocross events. (Low-heat range types excluded)
*360° Laser WeldingThe process used to mount the iridium tip is a highly reliable “All-around Laser Welding” process that is able to withstand all kinds of driving conditions. (For all plug types)
*Projected Center ElectrodeIn order to improve ignitability, the center electrode protrudes more than with conventional type plugs. This improves both acceleration response time and performance.(Only with: IU31, IUH24, IUH27, IX22, IX24, IX27, IUF22, IUF24, IWF22, IWF24, IWF27, IW24, IW27, IW29, IW31, and IW34)
*0.4 mm Diameter Ultra-?ne Iridium Center ElectrodeUsing a new iridium alloy with a very high melting point, the tip of the electrode can be made very fine. This enables the reduction of voltage necessary to cause the spark, and greatly improves ignitability. Moreover, the special iridium alloy used was developed by DENSO
*Taper-cut Ground ElectrodeThe tip of the ground electrode is cut to a fine taper to reduce the adverse effects of quenching, which greatly improves fuel ignitability. Also, because of the streamlined, taper-cut shape, the fuel-air mixture spreads more evenly in the gap, resulting in steady, reliable igniting of combustion.(excluding IUF27A, IUF31A, IU24A, IU27A, IU31A, IY24, IY27 & IY31)
*U-Groove Ground ElectrodeThe U-shaped groove on the ground electrode insures that the inside surface area is large enough to generate the flame kernel. This shape enables lower voltage needed to cause the spark and results in excellent ignitability without increasing the size of the spark gap. (excluding IUF27A, IUF31A, IU24A and IU31A)
*Insulator ProjectionThe projection of the insulator is optimally designed based on each plug's thermal value. This corresponds to requirements unique to thermal value, such as self-cleaning ability at lower thermal values, and heat resistance at higher thermal values. (For all plug types)
This product will suit the bikes listed below.
| Make | Model | Year |
|---|---|---|
| APRILIA | RSV4 Factory | 2009,2010,2011,2012,2013,2014,2015,2016 |
| APRILIA | RSV4 R | 2010,2011,2012 |
| APRILIA | RSV Mille SP | 2000,2001 |
| DUCATI | Monster S4R Testastretta | 2007,2008 |
| DUCATI | Monster S4Rs Testastretta | 2006,2007,2008 |
| DUCATI | Monster S4R | 2006,2007 |
| DUCATI | ST3 | 2004,2005,2006,2007 |
| DUCATI | 749 | 2003,2004,2005,2006 |
| DUCATI | 999 | 2003,2004,2005,2006 |
| DUCATI | 999R | 2003,2004,2005,2006 |
| DUCATI | 999S | 2003,2004,2005,2006 |
| DUCATI | Monster S4Rs | 2006 |
| DUCATI | 998 Biposto | 2002,2003 |
| DUCATI | 998 Monoposto | 2002,2003 |
| DUCATI | 998R | 2002 |
| DUCATI | 998S | 2002 |
| DUCATI | 996R | 2001 |
| GILERA | Runner 125 | 2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011 |
| GILERA | DNA 125 | 2001,2002,2003 |
| KAWASAKI | ZX6R Ninja | 1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016,2017,2018,2019 |
| KAWASAKI | ZZR600 | 1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008 |
| KAWASAKI | VN250 Eliminator V | 1997,1998,1999,2000,2001,2002,2004,2005,2006,2007 |
| KAWASAKI | ZR1100 Zephyr | 1992,1993,1994,1995,1996,1999,2002,2003,2004,2005,2006 |
| KAWASAKI | ZR250 Balius II | 1997,1998,2000,2001,2002,2003,2004,2005,2006 |
| KAWASAKI | ZX6RR Ninja | 2003,2004,2005,2006 |
| KAWASAKI | ZZR1200 | 2002,2003,2004,2005 |
| KAWASAKI | ZX7R Ninja | 1991,1992,1993,1994,1996,1997,1998,1999,2000,2001,2002,2003 |
| KAWASAKI | ZZR1100 | 1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001 |
| KAWASAKI | ZR1100 Zephyr RS | 1996,1997,1999 |
| KAWASAKI | ZX7RR Ninja | 1996,1997,1998,1999 |
| KAWASAKI | KLX250R | 1991,1992,1993,1994 |
| KAWASAKI | ZXR750R | 1991,1992,1993,1994,1995 |
| KAWASAKI | ZXR250 | 1991,1992,1993 |
| KAWASAKI | ZX1000 Ninja ZX-10 | 1988,1989,1990 |
| PIAGGIO | MP3 250 | 2006,2007,2008,2009,2010,2011,2012,2013,2014 |
| PIAGGIO | X8 | 2005,2006,2007,2008 |
| PIAGGIO | Zip | 2002,2003,2004,2005,2006 |
| PIAGGIO | Vespa ET4 | 2000,2001,2002,2003,2004,2005 |
| PIAGGIO | LIBERTY 150 | 2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2014,2015,2015,2016,2016,2017,2018,2019 |
| PIAGGIO | BEVERLY 125IE-300IE-350 | 2010,2011,2012,2013,2014,2015,2016,2017,2018,2019 |
| SUZUKI | GSX1300R Hayabusa | 1999,2000,2001,2002,2003,2004,2005,2006,2007,2019,2020,2021,2022 |
| SUZUKI | GSXR1000 | 2001,2002,2003,2004,2005,2006 |
| SUZUKI | GSXR600 | 1998,1999,2000,2001,2002,2003,2004,2005,2006,2007 |
| SUZUKI | GSR600 | 2006,2007,2008,2009,2010,2011 |
| SUZUKI | DRZ250 | 2001,2002,2003,2004,2005,2006,2007 |
| SUZUKI | TL1000S | 1997,1998,1999,2000,2001 |
| SUZUKI | RF900 | 1998,1999,2000 |
| SUZUKI | DR250 | 1995,1996,1997,1998,1999 |
| SUZUKI | GSXR1100 | 1993,1994,1995,1996,1997,1998 |
| SUZUKI | RF600R | 1993,1994,1995,1996,1997,1998 |
| SUZUKI | GSXR750W | 1993,1994,1995 |
| SUZUKI | GSXR250 | 1987,1988,1989 |
| YAMAHA | YZF R1 | 1998,1999,2000,2001 |
| YAMAHA | FZ8 | 2010,2011,2012,2013,2014,2015,2016 |
| YAMAHA | XJ6 Diversion | 2009,2010,2011,2012,2013,2014 |
| YAMAHA | YZF600R | 1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007 |
| YAMAHA | FZS1000 Fazer | 2001,2002,2003,2004,2005 |
| YAMAHA | YZF750 SP | 1993,1994,1995,1996,1997,1998 |
| YAMAHA | FZR600 | 1989,1990,1991,1992,1993 |